Findings for knitted wire jewellery

To make it easy for you to choose the correct findings, I have put together packs with selections of everything you might need. Although there are instructions in my pattern, each pack includes more detailed information and pictures.
If any item normally included is out of stock then a substitute will be made of equal or greater value.

Selection pack of silver and gold plated End bars including jump rings £3

This is valued at approx. £4.50 and contains the following:-

Selection pack of silver and gold plated mixed findings & End bars including jump rings £5

This is valued at approx. £9 and contains the following:-

Selection pack of mixed findings £5 

This is valued at approx. £9 and contains the following:-

E6000 Glue - Sadly out of stock as impossible to find a supplier

This is an extremely strong multi-purpose adhesive. It is clear, waterproof, non-flammable, paintable and flexible. It is excellent for jewellery making as it fills any gaps.

For joining non porous surfaces, apply a very small amount to each surface, wait 2-10 minutes and press surfaces together. Curing takes 24-72 hours.

It is also very useful for any projects where you plan to stitch either by hand or machine through the glue as it remains flexible if spread thinly.
A great glue! 

Earring findings

£1 per pack

Earring hooks 8 pairs SP or GP or 4 pairs each SP and GP. Also available in Antique copper

8 pairs with jump rings per pack

Leverback earring hooks SP only

3 pairs with jump rings per pack

Adjustable Earclips for non pierced ears SP or GP 

1 pair per pack

Sterling Silver Earring hooks 

£1.50 per pair

To turn your knitted earring into jewellery, you'll need to attach an earring hook. This can be sewn on with the wire tails. Alternatively, a cover/cap can be glued in place and the earring hook attached to that.

Jump ring is sewn on with the wire tail & the hook is attached.

Petal Cap (or Cord End) is glued on and the hook is attached.

Petal Caps SP or GP

10 per pack

Small Cord Ends 5 pairs SP or GP Internal dimension 3.2mm 

10 per pack

Findings to finish off Bracelets or Necklaces 

£1 per pack

To turn your knitted bracelet or necklace into jewellery, you'll need to attach a clasp. Jump rings can be sewn on with the wire tails and the clasp attached. Alternatively, an End Bar or Cord End (below) can be glued in place over the wire ends and the clasp attached to that.

Magnet clasp stitched on

Button clasp with jump rings stitched on

Cord end glued on and then fancy toggle clasp attached
with jump rings

13mm End Bar glued on and then trigger clasp attached
with jump rings

Large Cord Ends for Bracelets or necklaces SP or GP internal dimension 4.4mm

10 per pack

Largest cord ends with rotating wire loop. SP or GP Internal dimension 5.7mm

6 per pack

For narrow bracelets and necklaces you will need 5mm-6mm size End Bar which is available in smooth or textured finish in SP or GP 

10 per pack.

Medium width braided jewellery requires size 9mm- 13mm  End Bar SP

8 per pack.

Wide braided jewellery requires size 16mm-19mm End Bar

SP or GP

6 per pack.

Clasps for Bracelets or Necklaces 

All £1 per pack

Also called Trigger Clasp. SP only
4 in pack

Very neat and secure. SP or GP
4 in pack

For necklaces only SP or GP
4 in pack (may vary in design)

VERY strong little magnets SP only. 1 in pack

Various fancy clasps SP or GP
2 in pack

Plain clasps SP or GP
2 in pack

Large plain clasp SP only
1 in pack

Large fancy clasp SP only
1 in pack (limited stock)

Extras 

All £1 per pack

Elastic grips round end of arms on glasses. SP or GP. Can be painted with nail varnish.
2 pairs per pack

Use to extend the length of necklaces or bracelets by up to 2" SP or GP
3 per pack

Essential jump rings. 10 each of 5 of the most commonly used sizes. SP or GP
50 in pack

Enlarged photo of a jump ring opener/closer This is a really useful tool if you are using a lot of jump rings. There are 4 slots for wire diameters 0.9mm, 1.1mm, 1.5mm and 2mm
£2.50